Pneumatic lifting table ST-3 / R mini
Using this pneumatic table you can significantly improve both productivity and the quality of
Lifting table with pneumatic drive. For general use in the upholstery industry, for manufacturing of
– The height of the lifting table can be adjusted during the manufacturing process;
– The table is supported with a steel frame, pneumatic cylinder, and an automatic drive;
– The automatic drive is foot-controlled at both sides of the table;
– The table has a connection (output) for pneumatic devices
– After the table is cut off from the power supply, it is automatically blocked (if the power supply is cut off,
the table top will not drop);
– The table has a drawer for storing basic upholstery tools.
The table structure is made of steel. The pneumatic cylinder D125x600 is foot-controlled at both
sides of the table. Leverage raises the table top to a maximum height of 1280 mm and lowers it to 300 mm.
The particle board table top is covered with high-quality fitted carpet and furnished with stainless
steel slide blocks which help to move furniture pieces on the table as well as grounding electrostatic
charges. Prevention of electrostatic charges avoids the occurrence of sparks and fire.
Model: ST-3/R MINI
Working pressure: 6 bar (87 PSI)
Tabletop dimensions: 1600 mm x 900 mm (62.99″ x 35.43″)
Pneumatic cylinder: D125x360
Minimum height: 320 mm
Maximum height: 1060 mm (41.73″)
Maximum load: 130 kg (286.6 lbs)